Телефон за връзка

Усилвател TAPCO J1400 - Робокс ЕООД

Натиснете върху снимката за галерия

346.66 €

678.01 лв.

Производител: LD Systems

Наличност: Наличен на склад

За поръчки

*Плащания се приемат само в официалната парична единица на Р. България

Изходна мощност при 4 Ω – 2 х 250 W

Tapco J1400 Specs

Power Rating	800W @ 2Ω Stereo (per channel) 450W @ 4Ω Stereo (per channel) 310W @ 8Ω Stereo (per channel) 1400W @ 4Ω Bridged-Mono 900W @ 8Ω Bridged-Mono
Damping Factor	>300 @1 kHz and below
Input Sensitivity	1.15 V (+3.4 dBu) for rated power into 4 Ohms
Input Impedance	20 kOhms (balanced) 10 kOhms (unbalanced)
Gain	32 dB
Frequency Response	25 Hz - 25 kHz (+0, -1 dB)
Signal-to-Noise Ratio	>100 dB below rated power into 4 Ohms
Total Harmonic Distortion (THD)	<0.03% @8 Ohms (20 Hz - 20 kHz)
Input Connections	2 x XLR female, balanced 2 x 1/4" TRS phone, balanced
Output Connectors	3 x Speakon speaker out(Channel A, Channel B, bridged) 4 x binding post speaker out
Controls Front Panel	2 x Rotary Volume Control Knobs 1 x On/Off Power Switch
Controls (Rear)	1 x 30 Hz SubSonic Filter Switch 1 x Clip Limit Switch 1 x Mono/Stereo/Bridge Amp Mode Switch 1 x Circuit Breaker Button
Indicators	1 x Power On LED Indicator Light 1 x Overload Indicator Light 1 x Signal Indicator Light Note: All indicators are located on Front Panel
Cooling	Dual Variable Speed Fans, back-to-front airflow
Power Consumption	10.6 Amps (@2 Ohms stereo, 120V) 6.7 Amps (@4 Ohms stereo, 120V) 5.1 Amps (8 Ohms stereo, 120V) 0.5 Amps (idle)
Power Requirements	120 VAC, 60 Hz; 240 VAC, 50 Hz; 100 VAC, 50/60 Hz; 220 VAC, 60 Hz
Dimensions	19 x 3.5 x 15.7" (483 x 89 x 400mm)
Weight	48.5 lbs (22.0 kg)
Specialties	Back-to-Front Vari-Speed Fan Cooling Overload Protection Circuitry