Amplifier TAPCO J1400 - Robox Ltd.
Усилвател TAPCO J1400
Натиснете върху снимката за галерия

Amplifier TAPCO J1400

678.00 lev.
346.66 €

Manufacturer: LD Systems

Availability: In stock

*

Tapco J1400 Specs

Power Rating
800W @ 2Ω Stereo (per channel)
450W @ 4Ω Stereo (per channel)
310W @ 8Ω Stereo (per channel)
1400W @ 4Ω Bridged-Mono
900W @ 8Ω Bridged-Mono
Damping Factor
>300 @1 kHz and below
Input Sensitivity
1.15 V (+3.4 dBu) for rated power into 4 Ohms
Input Impedance
20 kOhms (balanced)
10 kOhms (unbalanced)
Gain
32 dB
Frequency Response
25 Hz - 25 kHz (+0, -1 dB)
Signal-to-Noise Ratio
>100 dB below rated power into 4 Ohms
Total Harmonic Distortion (THD)
<0.03% @8 Ohms (20 Hz - 20 kHz)
Input Connections
2 x XLR female, balanced
2 x 1/4" TRS phone, balanced
Output Connectors
3 x Speakon speaker out(Channel A, Channel B, bridged)
4 x binding post speaker out
Controls Front Panel
2 x Rotary Volume Control Knobs
1 x On/Off Power Switch
Controls (Rear)
1 x 30 Hz SubSonic Filter Switch
1 x Clip Limit Switch
1 x Mono/Stereo/Bridge Amp Mode Switch
1 x Circuit Breaker Button
Indicators
1 x Power On LED Indicator Light
1 x Overload Indicator Light
1 x Signal Indicator Light
Note: All indicators are located on Front Panel
Cooling
Dual Variable Speed Fans, back-to-front airflow
Power Consumption
10.6 Amps (@2 Ohms stereo, 120V)
6.7 Amps (@4 Ohms stereo, 120V)
5.1 Amps (8 Ohms stereo, 120V)
0.5 Amps (idle)
Power Requirements
120 VAC, 60 Hz; 240 VAC, 50 Hz; 100 VAC, 50/60 Hz; 220 VAC, 60 Hz
Dimensions
19 x 3.5 x 15.7" (483 x 89 x 400mm)
Weight
48.5 lbs (22.0 kg)
Specialties
Back-to-Front Vari-Speed Fan Cooling
Overload Protection Circuitry

Similar products